Here for sale we have a Jackson DK2M Dinky in Trans Black Finish. Made in Japan, this guitar features a Bolt-in construction consisting of a Alder body with a Flamed Maple veneer top, Maple neck with a sleek 24 Jumbo fret Maple fingerboard. This guitar has been appointed with a Jackson-licensed Floyd Rose low-profile double locking tremolo system and a set of Jackson sealed tuning machines. The pickups featured are a Seymour Duncan JB and a Seymour Duncan Jazz humbucker, these are wired to a 3-way blade selector,
master volume and tone controls.
The Maple neck sits comfortably in the hand, with its ‘Speed Neck’ profile and Satin finish providing for smooth and effortless navigation up and down the neck. The Maple fingerboard provides an effortless, tactile surface under the fingers as well as offering a robust playing surface, and with its 14"-16" compound radius and Jumbo frets assist with string bends and vibrato techniques, delivering a tailored playing experience in any position. The double cutaway body design provides uninhibited access to the upper register, with large cutaways and a sculpted neck joint that ensures that even players with large hands are well accommodated.
Amplified, this guitar has a thick low end grunt and sculpted mid range thanks to its pair of Seymour Duncan pickups. The Seymour Duncan JB bridge pickup incorporates a massive ceramic magnet and hot coil windings to deliver powerful but balanced rock and metal tones with rich upper-midrange harmonic content. The low strings are tight and the high strings scream with harmonics, making it a go-to pickup for hard-hitting crunch rhythms and blazing lead tones. The Seymour Duncan Jazz in the neck position offers all the soloing clarity you could wish for, with sweet sustain and a warm, full sound that still possesses a clear attack providing a hot output delivering smooth, fluid solo tones under gain, while still being capable of bell-like clean tones.
Please be aware that for international buyers import fees are not included in our postage and packaging cost, this only covers the cost of the guitar being sent to you. Import fees will be charged by Customs upon the guitar's arrival in the recipient country. Due to Brexit, this also applies to EU buyers. We advise checking the total import cost with Customs as this is not information we are able to accurately provide.
Jackson DK2M Dinky Trans Black MIJ Electric Guitar
Brand - Jackson
Model - DK2M Dinky
Finish - Trans Black
Made in - Japan
Top - Flamed Maple Veneer
Body - Alder
Neck - Maple
Neck Profile - Speed Neck
Fingerboard - Maple
Fingerboard Radius - 14”-16” compound radius
Frets - 24, Jumbo
Scale length - 25.5”
Nut width - 1.687”
Pickups - Seymour Duncan JB (Bridge), Seymour Duncan Jazz (Neck)
Controls - 3-way selector, Master volume, Master Tone
Our ID: 107052598820
Weight: 7.8lbs
Serial: 9830237
Aesthetic Condition:
Headstock: Overall very good condition. The tip of the headstock displays light scuff marks which has slightly discolored the finish. All other aspects of the headstock display light signs of past use.
Neck: Overall very good condition. The fingerboard display discoloration across the register as is common with satin finished maple, along with this a light indentation is present to the 2nd fret below the G string, this can not be felt under the fingers in the playing position. A light indentation is present to the rear of the neck behind the 3rd fret.
Body: Overall very good condition. All aspects of the body display light to mild scratching which can only be seen under direct light as is common with high gloss finishes. Light indentations can be seen to the rear face treble side horn which can only be seen under close scrutiny under direct light. Another light indentation is present to the treble side lower bout edge, this have slightly pierced through the finish but does not expose the wood. There is a crack to the bridge pickup casing.
Condition of Frets:
The frets demonstrate light signs of use. There is considerable material remaining for future fret work the new owner may wish to perform.
Current Set Up:
Truss Rod: Fully functional. Truss rod tool (4mm hex) not included.
Hardware: Overall very good condition. Light tarnishing and oxidation can be seen to the bridge and locking nut screws. Tremolo arm included.
Structural: No concerns or issues to note.
Height of the string from the 12th Fret-1.75mm - Bass 2mm
Please be aware that the action on a guitar may move slightly in transit and this measurement is the current height.
Strings on Guitar - 9-42
There is a hump in the middle register of the neck that cannot be alleviated via the truss rod. This causes some fret buzz in the early register. This may be alleviated by using heavier gauge strings.
Electrics:
Fully functional.
Case & Accessories
No case is provided with this guitar.
Tremolo arm included.